HEAVY INDUSTRIAL SLIDING GATE SYSTEM

Each Ezi Heavy Industrial Slide Gate System comprises the following important mechanical modules: the gate main support tower, the gate leaf, the gate back rail and the end post. When bolted together, the main tower and back rail form the main support and rolling platform for the gate leaf. The gate leaf is then attached to this platform with two back-check plate roller sets. The roller sets, when bolted on, lock the sliding gate leaf within the confines of the gate back rail. The gate system is then bolted to a concrete footing that has been engineered to provide adequate weight to counter-balance the gate system. The combination of gate design and concrete footing allows the gate to roll out over the relevant road opening without tipping or sagging so it’s essentially traveling in free air.

Up to 10 metre road widths (for a single gate) are standard within our product range. The Ezi slide gate system needs no road rails, tracks or overhead supports.

Each Ezi Heavy Industrial slide gate is designed with automation features as standard. An industrial three-phase drive motor, PLC control logic, frequency invertor and proximity sensors are some of the highly advanced products used in Ezi’s product range. Each Ezi PLC system allows for special features and auxiliary equipment to be added without major parts redundancy for example, traffic light controls or card access readers.

Our main support and rolling platform is well balanced and provides smooth and efficient operations. Our standard cantilevered designs operate at variable speeds. These are adjustable to a maximum of 800mm per second of gate travel.

The Ezi Heavy Industrial slide gate system is not affected by road crowns, kerbs or falls for drainage in roads. All associated works to install an Ezi slide gate system are performed off to the side of the relevant road, thereby avoiding closures, which can be inconvenient and costly to your business.

The Ezi Heavy Industrial sliding gate system has no equal in the industrial market place. Each system will perform reliably all day, every day.

At Ezi, we believe safety should not be an option. That is why our systems have been fully risk assessed to contemporary O H & S standards by an independent authority.

Each Ezi Heavy Industrial sliding gate system has an extensive array of safety devices and features which form part of our standard product offering.

Our wealth of knowledge and experience gained over many years has enabled Ezi to evolve and develop this premium product to suit a variety of ever-changing environments.

The Heavy Industrial gate systems, as developed by Ezi, are purpose-built for the industrial market place. The key consideration is safety of operation without compromise to security. High levels of performance, aesthetically pleasing design and unrivalled reliability are also features.

The high performance and advanced technology built into the Ezi slide gate will ensure reliable operation for many years to come. Ezi boasts a large end-user customer base and continues to provide product and service to Australia’s leading corporations.

Downloads: Catalogue | Datasheet | Technical Specification | Video

(OPTIONAL: Telescopic Sliding Gate In House Testing | Installed)